                                                            Graphtec Corporation

Cutting Plotter Controller for CE6000 Ver.1.40B Supplementary Information
-------------------------------------------------------------------------------

Introduction

This file provides important information on the use of the OPS676 Cutting 
Plotter Controller for CE6000. Be sure to read through this file carefully 
before attempting to use the controller.


Operating Environment
(The specification needs to be higher than recommended specification
 by using OS)

* 32-bit OS : Windows Vista
               (Home Basic, Home Premium, Business, Enterprise, Ultimate)
              Windows 7
               (Home Basic, Home Premium, Professional, Enterprise, Ultimate)
              Windows 8
               (Windows 8, Pro, Enterprise)
              Windows 8.1
               (Windows 8.1, Pro, Enterprise)
              Windows 10
               (Home, Pro, Enterprise, Education)

* 64-bit OS : Windows Vista x64 Edition
               (Home Basic, Home Premium, Business, Enterprise, Ultimate)
              Windows 7 x64 Edition
               (Home Basic, Home Premium, Professional, Enterprise, Ultimate)
              Windows 8 x64 Edition
               (Windows 8, Pro, Enterprise)
              Windows 8.1 x64 Edition
               (Windows 8.1, Pro, Enterprise)
              Windows 10 x64 Edition
               (Home, Pro, Enterprise, Education)

* CPU       : Intel Pentium4 or AMD Athlon64 processor
* Memory    : 1GB of RAM
* Monitor   : 1024x768 display(1280x800 recommended) with 32-bit video card
* Mouse
* CD-ROM drive
* USB Interface      : USB2.0(Full Speed)
* Serial Interface   : RS-232C
  Note:A plotter needs to be connected with either interface.


Installation

Run the SETUP.EXE file to begin installation. Follow the on-screen instructions
to complete the installation.


Usage Precautions

  Either Windows 95, Windows 98 Second Edition, Windows Me, Windows NT 4.0 or 
  Windows2000 is not operated with this Cutting Plotter Controller for CE6000.


Regarding the help menu of Cutting Plotter Controller operating with the
Windows 8, the Windows 8.1 and the Windows 10.

  The help menu of Cutting Plotter Controller is not displayed correctly when
  the Cutting Plotter Controller is launched by data output operation.
  Please open the help menu after the Cutting Plotter Controller launched from
  the menu of Windows 8, Windows 8.1 and Windows 10 when you want to open the
  help menu.


Trademarks

* Windows, Windows NT are registered trademarks of Microsoft Corporation.
* Graphtec has exclusive copyrights to the OPS676 product names.

END
